powercare@powercapbattery.com

|

+91 95 95 000044

2.5 Ah Ultra Capacitor

Specifications

Capacitance:  8.25 farad
Voltage:  15 V
Maximum Stored Energy:  Approx 900 J
Operating Temperature:  -20 °C to +65 °C
Weight:BSU 253 g + VRLA 713 g:  250 g
Time to charge on vehicle (@2500rpm):  30 s
Cycle Life:  5,00,000 cycles
Life Time:  90,000 hrs
Over voltage protection:  >15.8 V

Main Features

Ultra-capacitor circuit is capable of giving full crank for starting the vehicle.

Long life Ultra-capacitor circuit.

Zero Maintenance

Eco friendly ultra capacitor

Distilled Water not required

Easy installation and testing

36 months warranty on Ultra-capacitor.

2.5 Ultra Capacitor

Bajaj Platina DTS-SI (KS)
Yamaha Libero G5 (KS)
Hero CD Dawn (KS)
Yamaha Alba (KS)

Comparison of BSU 2.5 with Lead-Acid Battery and with Sealed maintenance-free battery"

Parameter PowerCap Ultra Capacitors 2.5 Ah lead-acid Battery 2.5 Ah sealed Maintenance- Free battery
life More than 10 years 24 with maintenance 12 to 24 months
(without maintenance)
Warranty 36 months Make E - 15 months Make E - 24 months
Make A - 30 months
Make B - 24 months
Make M - 24 months
Maintenance Not Required Required Charging Required
MRP* Rs. 840 Make E- Rs. 930 /- Make E- Rs. 930 /-
Make A- Rs. 838 /-
Estimated Cost for 10 years Rs. 840 Rs. 5250 Rs. 4650
Initial charging Not Required Required Not Required
Eco friendly No Pollution Contain harmful element like lead, acid Contain harmful element like lead
Capacity(Engine Off) 30 sec 1 hour 1 hour
Short-circuit & over-voltage Completely Protected No protection No protection
After long period of engine halt No Problem Battery may get discharged. Affects battery life. Battery may get discharged. Affects battery life.
Weight Light weight (250 gm) Heavy weight (1.25 kg) Heavy weight (1.25 kg)

Installation Instructions

When removed from packaging


  • Ensure fully charged VRLA 2.0Ah VRLA battery ie more than 12.5V
  • Connect the terminals of the 2.0 Ah VRLA battery with proper polarity as mentioned on the battery
  • Place the 2.0 Ah VRLA battery in the ULTRA-capacitor Unit
  • Clean the battery termninals,remove precipitaion / sulfphation due to acid

On the Vehicle


  • Place Hybrid battery in the space provided on the vehicle.
  • Connect vehicle wires to the 2.5Ah Ultracapacitor terminals with correct polarity and fasten the nuts.
  • Start the vehicle and increase the throttle(accelerator) to 70% and wait for minute.

Caution


Ensure correct polarity (+/-). Do not short terminals.
No Distilled water required. Initial Charging is not required.
For AC-CDI engines only. Do not use for DC-CDI. Use of multiple horns may trigger over voltage indicator.

© All rights reserved by Powercap Battery | Proudly Published by Tapsoft